2025

Finite element models from additive manufacturing tool-paths for continuous fiber reinforced polymer composites
N. Peters, N. Elderfield, L.J. Sudak and Joanna C.H. Wong
12th International Conference on Materials for Advanced Technologies (ICMAT 2025), July 2025.

Effects of Thermal Treatment on Porous Carbon Fibers Derived from Asphaltenes
A. Darbandi and Joanna C.H. Wong
12th International Conference on Materials for Advanced Technologies (ICMAT 2025), Singapore, Singapore, June 30–July 4, 2025.

Effect of Protrusion Materials on Hybrid Rocket Fuel Regression Rates
Annapurna Basavaraju, Joanna C.H. Wong, and Craig T. Johansen
Proceedings of the Combustion Institute – Canadian Section Spring Technical Meeting, Calgary, Canada, May 12–15, 2025.

Modelling Thermomechanical Behavior of Additively Manufactured Quasi-Woven Shells
N. Peters, Nicholas Elderfield, L.J. Sudak, and Joanna C.H. Wong
AIAA Scitech Forum and Exposition, Orlando, USA, January 6–10, 2025.

Performance Evaluation of Lattice Augmented Hybrid Rocket Fuels with Protrusions
Annapurna Basavaraju, Joanna C.H. Wong, and Craig T. Johansen
AIAA Scitech Forum and Exposition, Orlando, USA, January 6–10, 2025.

2024

Starting behaviour of a small wind turbine manufactured from petiole of the miriti palm
I. dos Santos Gomes, J. Rogério Pinheiro Vaz, Joanna C.H. Wong, and D. Wood
The Workshop on Renewable Energy and Sustainability (WREN), Belem, Brazil, November 4–8, 2024.

Morphological evolution of continuous fiber networks during additive manufacturing
N. Peters, Nicholas Elderfield, L.J. Sudak, and Joanna C.H. Wong
Canadian International Conference on Composite Materials (CANCOM 2024), Waterloo, Canada, August 6–9, 2024.
Link

Effect of heat treatment on porosity in asphaltene-derived carbon fibers
A. Darbandi and Joanna C.H. Wong
Canadian International Conference on Composite Materials (CANCOM 2024), Waterloo, Canada, August 6–9, 2024.
Link

The Petiole of the Miriti Palm: A sustainable material for wind turbine blades?
I. dos Santos Gomes, Joanna C.H. Wong, J. Rogério Pinheiro Vaz, and D. Wood
Torque, Florence, Italy, May 29–31, 2024.

Sustainable materials for small and large blade
I. dos Santos Gomes, Joanna C.H. Wong, J. Rogério Pinheiro Vaz, and D. Wood
International Symposium on Current Challenges of Wind Energy Development: Materials Science and Structural Aspects, Athens, Greece, May 13–15, 2024.

Performance of Paraffin Wax Embedded with Lattice and Protrusion in Hybrid Rocket
Annapurna Basavaraju, Joanna C.H. Wong, and Craig T. Johansen
AIAA Scitech Forum and Exposition, Orlando, USA, January 8–12, 2024.

2023

The effects of over-extrusion on the in-situ consolidation of additively manufactured composites
Nicholas Elderfield and Joanna C.H. Wong
Twenty-third International Conference on Composite Materials (ICCM23), Belfast, Northern Ireland, July 30–August 4, 2023.
Link

Effect of heat treatment on the chemistry and microstructure of asphaltene-derived carbon fibers
A. Darbandi, B. Dharmalingam, J. Radovic, J. Van Humbeck, M. Trifkovic, and Joanna C.H. Wong
Proceedings of the Canadian Society for Mechanical Engineering International Congress 2023, Sherbrooke, Canada, May 28–31, 2023.

Spatial and functional control of extrusion head for additive manufacturing of continuous fibre reinforced polymer composites
H. Tawfik, V. Dhanda, N. Elderfield, P. Goldsmith, and Joanna C.H. Wong
Proceedings of the Canadian Society for Mechanical Engineering International Congress 2023, Sherbrooke, Canada, May 28–31, 2023.
Link

Enhancing undergraduate materials science labs for experiential learning
M. Love, M. Nightingale, Joanna C.H. Wong, and P. Egberts
American Society for Engineering Education (ASEE), Baltimore, USA, June 25–28, 2023.
Link

Improving the student laboratory experience through constructive alignment
M. Love, M. Nightingale, Joanna C.H. Wong, and P. Egberts
Canadian Engineering Education Association (CEEA-ACÉE), Okanagan, Canada, June 18–21, 2023.
Link

Preliminary Studies of Alberta Oilsands Asphaltenes as Carbon Fibre Precursors
A. Darbandi, B. Dharmalingam, A. Saengchan, M. Lau, J. Radovic, J. Van Humbeck, M. Trifkovic, and Joanna C.H. Wong
Carbon Fibre Futures 2023, Geelong, Australia, May 8–10, 2023.

2022

Developing a new additive manufacturing toolpath strategy for continuous fiber composites
Hussam Tawfik, Nicholas Elderfield, and Joanna C.H. Wong
Canadian International Conference on Composite Materials (CANCOM 2022), Fredericton, Canada, July 12-15, 2022.

Advancing continuous fiber fused filament fabrication for high performance applications
Nicholas Elderfield and Joanna C.H. Wong
Canadian International Conference on Composite Materials (CANCOM 2022), Fredericton, Canada, July 12-15, 2022.
Link

Feasibility of thermoplastic composites as precursors for carbon fibre reinforced carbon matrix composites 
Muhammad Shafi and Joanna C.H. Wong
Proceedings of the Canadian Society for Mechanical Engineering International Congress 2022 (CSME Congress 2022), Edmonton, Canada, June 5-8, 2022.
Link

2020

Direct stamp forming of flexible hybrid fibre preforms for thermoplastic composites
Christoph Schneeberger, Nicole Aegerter, Sara Birk, Shelly Arreguin, Joanna C.H. Wong, and Paolo Ermanni
SAMPE Europe Conference 2020, Amsterdam, Netherlands, September 2020.

2018

A scalable process for making hybrid bicomponent fibers for the efficient manufacturing of thermoplastic composites
Nicole Aegerter, Christoph Schneeberger, Shelly Arreguin, Joanna C.H. Wong, and Paolo Ermanni
4th International Conference & Exhibition on Thermoplastic Composites, Bremen, Germany, October 2018.

Optimizing the thermoplastic welding properties in an FRPC additive manufacturing process
Martin Eichenhofer, Shelly Arreguin, Joanna C.H. Wong, and Paolo Ermanni
4th International Conference & Exhibition on Thermoplastic Composites, Bremen, Germany, October 2018.

Thermoplastic composite materials for high voltage insulator applications
Maximilian Volk, Joanna C.H. Wong, Shelly Arreguin, Christiane Bär, Frank Schmuck, and Paolo Ermanni
18th European Conference on Composite Materials, Athens, Greece, June 2018.
 

2017

Empirical optimization of kiss roll coating for high-speed bicomponent fibre production
Nicole Aegerter, Christoph Schneeberger, Joanna C.H. Wong, and Paolo Ermanni
SAMPE Europe Conference 17 (Students Symposium), Stuttgart, Germany, November 2017.

A method for dispersing particle fillers in thermoplastic composites using commingled yarns
Joanna C.H. Wong, Nicole Hertaeg, and Paolo Ermanni
21st International Conference on Composite Materials, Xi'an, China, August 2017.

Manufacturing of Hybrid Bicomponent Fibers by Kiss-Roll Coating
Christoph Schneeberger, Joanna C.H. Wong, and Paolo Ermanni
21st International Conference on Composite Materials, Xi'an, China, August 2017.

Experimental Investigation of Processing Parameters on Porosity in Continuous Lattice Fabrication
Martin Eichenhofer, Joanna C.H. Wong, and Paolo Ermanni
21st International Conference on Composite Materials, Xi'an, China, August 2017.

2016 

Bicomponent polymer/glass fibres for stamp forming
Christoph Schneeberger, Joanna C.H. Wong, and Paolo Ermanni
SAMPE Europe Conference 16, Liege, Belgium, September 2016.
Link

Manufacturing of bicomponent fibers for thermoplastic composites: A feasibility study
Christoph Schneeberger, Joanna C.H. Wong, and Paolo Ermanni
17th European Conference on Composite Materials, Munich, Germany, June 2016

2009

The characterization of porous materials from particle-stabilized liquid foams aspiezoelectric space-charge electrets
Joanna C.H. Wong, Stephan Busato, Elena Tervoort, Urs T. Gonzenbach, André R Studart, Ludwig J. Gauckler, and Paolo Ermanni
20th International Conference on Adaptive Structures and Technologies, Hong Kong, October 20 - 22, 2009

2008

The development of particle-stabilized polymer foams for potential passive and active damping applications
Joanna C.H. Wong, Stephan Busato, Paolo Ermanni, Elena Tervoort, Urs T. Gonzenbach, André R Studart, and Ludwig J. Gauckler
SEICO 08 - Paris, France - Mar. 31- Apr. 2 / 2008
Link